Issue: PC will not load into application - stuck at initializing drawers


  1. Shutdown PC, disconnect power for 10 seconds or flush once off and restart PC If system loads, check contents of all drawers for above issues
  2. If system still hangs, Disconnect USB cables from all drawers to the PC and then restart the PC by pressing and holding the power button until it shuts down - Restart the system without any drawers attached.
  3. Check fingerprint reader, keyboard, mouse and tag reader for signs of worn cabling which could short out and not allow system to load.
  4. If it's none of the above, the problem is likely the PC itself